SETTING THE DATE
Pull the crown once (1 click). Turn the crown counter-clockwise to adjust the desired date, please note that the date will change between 11 p.m. and midnight.
SETTING THE TIME
Pull the crown a second time (2nd click). Turn it clockwise until the watch hands are positioned at the desired time. Reset the crown by pushing it back to its normal position.
Slide pin sideways to release the strap. Hold pin back while placing strap into holes on either side of the watch. Release lever to secure strap.
ADJUST MESH STRAP
Release lock plate and remove from locking clasp.
Press plate clamp down to lock into place (use a screw driver or similar tool to assist).
Insert a screw driver (or similar tool) into slot as shown and pry open the plate clamp. (do not use the locking bar for leverage)
Place hook over locking bar and close the lock plate.
Slide locking clasp to desired position.